Search found 90 matches

by Foxx
Thu Sep 15, 2011 5:26 pm
Forum: Specifications / Hardware
Topic: Installed External HD Recognized by bios, but cant fdisk-- Help --
Replies: 1
Views: 6045

Re: Installed External HD Recognized by bios, but cant fdisk

I have done whats has been dubbed the "Dingleberry Mod" which is what you have done. Can you snap some pics? I have extensive writeups on my progress on different drives that do and dont work, how I have hooked them up, and the needed steps to make sure they wont blow up... and yes, I have had a 1.8...
by Foxx
Sun Jun 19, 2011 2:20 pm
Forum: Specifications / Hardware
Topic: Drives that work using the "Dingleberry" Mod
Replies: 1
Views: 5677

Re: Drives that work using the "Dingleberry" Mod

Well this was working perfectly fine until the HDD Decided to die. Mechanical failure of the drive itself. If you happen to get your hands on one of these drives I wish you the best of luck. You should be able to get the best performance out of your WebDT with it.
by Foxx
Sun Jun 19, 2011 9:11 am
Forum: Specifications / Hardware
Topic: Drives that work using the "Dingleberry" Mod
Replies: 1
Views: 5677

Drives that work using the "Dingleberry" Mod

For those of you who dont know I have removed the 44 pin low-profile header from one of my WebDT 366s and routed an IDE cable outside, which has been dubbed the "Dingleberry Mod". At first it looked like this; https://lh4.googleusercontent.com/-xoS3symq18M/SgjQVuf9SCI/AAAAAAAAC_w/8LhhWroo-8E/s640/IM...
by Foxx
Tue Nov 02, 2010 6:49 pm
Forum: Windows on a WebDT366?
Topic: Webdt 366 MicroWin Xp installation/ keyboard question
Replies: 3
Views: 7464

Re: Webdt 366 MicroWin Xp installation/ keyboard question

MicroXP has pretty much all and any drivers stripped from it. This is what you get for using it. Install USB HID Keyboard Generic drivers and hope it works.
by Foxx
Wed Oct 06, 2010 2:19 pm
Forum: Specifications / Hardware
Topic: IDE-CF MOD
Replies: 19
Views: 43356

Re: IDE-CF MOD

I hardwired proper IDE cable to the motherboard, routed it outside the case, and terminated with a standard 44 pin IDE header. That lets me plug in pretty much anything I need, although I do plan on making a hardwired Microdrive adapter sometime soon.
by Foxx
Wed Oct 06, 2010 2:10 pm
Forum: General Discussion
Topic: Success - aftermarket Apacer ADM II 5v/90 degree DOM in my red DT360!
Replies: 5
Views: 14524

Re: Success - aftermarket Apacer ADM II 5v/90 degree DOM in my red DT360!

I might be able to repair those for you. Toss me a PM if you are interested.
by Foxx
Sun Jul 18, 2010 1:29 am
Forum: The Collective
Topic: WebDT 366 GX Internal Documentation
Replies: 10
Views: 39046

Re: WebDT 366 GX Internal Documentation

Small note about the 512MB FlashROM boards. They are in a very VERY slow PIO Mode 1 - a Whopping 5MB/s, compare that to a modern UDMA 133MB/s drive, or SATA 300MB/s. TKMedia donated a 1GB Flashrom Board to me and it ran in UDMA mixed mode 2 which clocked at about 33.3MB/s - huge speed and performanc...
by Foxx
Sat Jul 17, 2010 6:32 pm
Forum: Specifications / Hardware
Topic: IDE-CF MOD
Replies: 19
Views: 43356

Re: IDE-CF MOD

Image

Works like a dream now! Even have an adapter letting me use 1.8" IDE drives. Got a 30GB hooked up. Sexy fast.
by Foxx
Sat Jul 17, 2010 6:28 pm
Forum: Specifications / Hardware
Topic: Connect CF-card to IDE2 JHDD2
Replies: 17
Views: 43091

Re: Connect CF-card to IDE2 JHDD2

[img width=480 height=360]http://lh4.ggpht.com/_i7ymkA4U878/SgjQVuf9SCI/AAAAAAAAC_w/ZHqyN5k4kDs/s640/IMG_0016.JPG[/img] Yup. [img width=480 height=360]http://lh4.ggpht.com/_i7ymkA4U878/StKTtdI4e5I/AAAAAAAADrM/XcBi1Bj-xfw/s640/PA110179.JPG[/img] Double Yup [img width=480 height=360]http://lh3.ggpht.c...
by Foxx
Tue Jan 05, 2010 12:51 am
Forum: Specifications / Hardware
Topic: Queries Abt CF Cards
Replies: 8
Views: 17033

Re: Queries Abt CF Cards

The Compact Flash card slot in the WebDT is only USB 1.1 as far as I know. The IDE bus on the other hand I have pushed up to UDMA Mode 2 using Microdrive.
by Foxx
Sat Dec 26, 2009 11:59 am
Forum: General Discussion
Topic: Flash Rom
Replies: 8
Views: 20238

Re: Flash Rom

The DOM is 3.3V, and also uses a non-standard IDE connector. Check my posts on the forums for more in depth details about the hardware.
by Foxx
Wed Nov 25, 2009 11:45 pm
Forum: Windows on a WebDT366?
Topic: Recommended Software for XP installs
Replies: 5
Views: 10505

Re: Recommended Software for XP installs

Uhhh, thats Windows Mobile software, not Windows XP. What the hell are you talking about? If you want to make an image of the OS, you can use DriveImage XML included with BartPE. Both are free tools. http://www.nu2.nu/pebuilder/  Bart's Preboot Environment http://www.runtime.org/driveimage-xml....
by Foxx
Wed Nov 25, 2009 7:05 pm
Forum: Specifications / Hardware
Topic: MOVED: DT366 Mountable Docks?
Replies: 0
Views: 2692

MOVED: DT366 Mountable Docks?

This topic has been moved to Welcome to WebDT.

[iurl=forum/viewtopic.php?t=8]forum/viewtopic.php?t=8[/iurl]

Because NEW questions are not FREQUENTLY asked questions, thus do not belong in the FAQ Section.
by Foxx
Wed Nov 25, 2009 4:24 pm
Forum: How are you using yours?
Topic: Wireless Warrior
Replies: 0
Views: 4418

Wireless Warrior

Many of my friends call me the 'Wireless Warrior' because of all the funky crap I do with radio and other wireless technologies. From scanning for wifi and bluetooth, to intercepting data over RF channels, and even some nifty Ham Radio Stuff. I have an inexpensive Atheros 5x00 802.11 a/b/g PCMCIA ca...
by Foxx
Wed Nov 25, 2009 3:15 pm
Forum: General Discussion
Topic: Core requirements for hacking your WebDT
Replies: 1
Views: 4196

Re: Core requirements for hacking your WebDT

I use USB Multiboot V10 to make my USB Thumbdrives bootable with my Windows OS install. I did a tutorial on how to use it on BSoD http://forums.bsodtv.org/Episode-30-Windows-XP-NT5-USB-Multiboot-t530.html Be forewarned that the WebDT units can get a little bitchy at what USB devices are hooked in. I...