webdt.org

thats cool I was just pointing out a couple of things i know from working on these.  couple  of things to look for in a dom are listed below  alot have been tried on these with little success 1. the 44 pin ide header on the dt 366 has  half height ide pins  so the one your ordered unless half heigh ...

np glad to see people finally using it .
updated above and added a link to the gx2 video drivers
I also added a link to sean limings site he has a few nice prebuilt application components on his site.

important things to note . - Button manager button #1 does not bring up dt keyboard click the drop down in button manager and it will  allow you to select the xp keyboard  or set it to any other of the 100+ free on screen keyboards available on the web. you can map any of the front buttons to any ap...

currently no one has been able to get a usb connection working under usb with ce 5 . you could connect to a netwrok share over your home network  or put the files on a usb flash drive and transfer them that way as well. Read these forums you will see some of the options you have on your dt along wit...

there is a command to enable ewf you dont need to touch your registry for that . http://msdn.microsoft.com/en-us/library/ms940853(WinEmbedded.5).aspx the graphical themes and such  can all be accomplished by going to control panel, system , advanced ,performance click on adjust for best performance ...

it is compat with wifi pcmcia cards however ce 5.0 has very little compat with it you will most likely need to change your os.

you can transfer files to your dt many ways over the internet through usb from a cf card  from a usb cd rom / usb hd. that isnt the problem its the apps wont install to ce 5 x86. the program you have is most likely not compatible with ce 5 x86  either

dont use ce5

Ok i know this is mostly a repost of my old posts for xp embedded i just wanted to clean it up and try to make it a little easier to use for everyone. To use the .slx file I have posted below you will need the following xp embedded studio  sp2  not  windows embedded standard you can get the demo dow...

you may be able to remove the plastic shroud  of the bulky one to make it fit

as far as i understand for active sync to work at all a client would be necessary. even with a cradle or a cable  im pretty sure it still wouldn't work. this is the problem  all of us  have had with ce 5 x86 there is little to no software out there for it.

my xp image was  under 300 megs installed so anything with more than 300 megs of space will work.

read some of the posts in this section and you will find your button drivers .

the touchscreen drivers are penmount  drivers they can be downloaded form their site. have you installed your button agent ?

nice another refference  can be found here i think they had it sub 250 megs http://www.mp3car.com/vbulletin/winnt-based/38088-super-small-xp-install-3.html post your ini settings on here so others can try . - Don't know what's touchscreen  drivers are for xp did you mean you cant find them or did yo...