internal ide flash upgrade

Topics on hardware and modifications. Please post your "how to" steps that involve tools here.
Post Reply
Posts: 7
Joined: Sun Oct 10, 2010 2:34 am

internal ide flash upgrade

Post by ravivraz » Mon Mar 19, 2012 11:07 am

i have done the upgrade with a Transcend 4 GB NAND.
made a connector for 40 pin ide.
made an image off the original xpe.
copied the image on the 4 gb.
made sure it will boot - using a pc.
pluged it in with NO pin 44.
and the following apears:
no boot device present Halting.
tryed jumpering it master/slave no jumper - nothing workes....
i am sure the image was copied good, and the flash hd works.
any one knows what should i do?

Posts: 569
Joined: Tue Mar 24, 2009 9:11 pm

Re: internal ide flash upgrade

Post by quotaholic » Thu Oct 25, 2012 8:41 am

Look at this post:


I have 4gb transcend in my DT366.

Post Reply