how to calibrate pen in 1024/768 mode?
-
- Newbie
- Posts: 5
- Joined: Sat Nov 07, 2009 10:42 am
how to calibrate pen in 1024/768 mode?
Hi i install windows xp emb. and all is ok. But when i try to calibrate in this resolution calibration failed. in Mode 800/600 all is Ok. I Undestand that the normal mode is 800/600 but i must to calibrate in 1024/768. In this virtual screen i dont have idea how to make this. I try many times. may be the pen driver is not suitable?Any idea will be good.
-
- Full Member
- Posts: 112
- Joined: Fri Apr 24, 2009 5:20 pm
- Location: Sussex, New Brunswick, CAN
Re: how to calibrate pen in 1024/768 mode?
Hi,
The screens in the DT366 will only support a max. resolution of 800x600.
It would be really great if we could get it higher but you can't.
Bruce
The screens in the DT366 will only support a max. resolution of 800x600.
It would be really great if we could get it higher but you can't.
Bruce
plane_crazy
-
- Newbie
- Posts: 5
- Joined: Sat Nov 07, 2009 10:42 am
Re: how to calibrate pen in 1024/768 mode?
This is clear, but i think if we have suitable driver this is possible. Just this driver must to recalculate pen position according to position in virtual screen. This must be easy for some one system programmer.