Hi guys, after selling my 366, it seems I've now acquired a DT220-S Thin client, and it didn't come with any adapters/wires/cables/pieces but the unit.
The seller was highly reputable and the feedback was immaculate. He said it was WORKING.
Only problem is:
I tried to wire my own 12Volt adapter to it, tried both polarities - With fail.
I know these units have a voltage/reversing protector, so I decided to remove the case.
Oddly enough they do - But I removed the power cable.
Also out of bad luck, I forgot my camera, and two pdas in my buddy's truck as well.
All I would like to know is if anyone would have anything REMOTELY similar to a board sheet/instruction manual or something like that..
thanks.,
Got my hands on a DT220-S, Can't find anything! Help!
-
- Jr. Member
- Posts: 53
- Joined: Sun Apr 05, 2009 8:25 pm
- Location: Coral Springs, Florida
- Contact:
Got my hands on a DT220-S, Can't find anything! Help!
Last edited by quotaholic on Sun Feb 14, 2010 2:56 pm, edited 1 time in total.
Re: Got my hands on a DT220-S, Can't find anything! Help!
Voltage isn't everything. What power/current rating did your 12V power supply have? You'll probably need at least 1 amp.
There's a product brief here: http://dtri.sg1002.myweb.hinet.net/pdf/webdt220.pdf, maybe the same website has some other info lurking within....
There's a product brief here: http://dtri.sg1002.myweb.hinet.net/pdf/webdt220.pdf, maybe the same website has some other info lurking within....
-
- Jr. Member
- Posts: 53
- Joined: Sun Apr 05, 2009 8:25 pm
- Location: Coral Springs, Florida
- Contact:
Re: Got my hands on a DT220-S, Can't find anything! Help!
Well ya, it's 12Volts @ 3 amps rated.
Not sure if that's peak but I tried the power switch/led cable on all 4 possible configurations.
Also I took a multimeter to the pins on those, and didn't get anything.
Possibly my adapter's end - I cut an old laptop charger for it.
But thanks for the instructions, I don't have adobe or any pdf reader on here yet, but I'll take a look.
Not sure if that's peak but I tried the power switch/led cable on all 4 possible configurations.
Also I took a multimeter to the pins on those, and didn't get anything.
Possibly my adapter's end - I cut an old laptop charger for it.
But thanks for the instructions, I don't have adobe or any pdf reader on here yet, but I'll take a look.
Re: Got my hands on a DT220-S, Can't find anything! Help!
dear sir
what is the processor of this unit
best regards
what is the processor of this unit
best regards
-
- Full Member
- Posts: 112
- Joined: Fri Apr 24, 2009 5:20 pm
- Location: Sussex, New Brunswick, CAN
Re: Got my hands on a DT220-S, Can't find anything! Help!
If you read the above pdf document it says there is a Geode processor in there. It does not say what speed however.
Bruce
Bruce
plane_crazy
-
- Administrator
- Posts: 569
- Joined: Tue Mar 24, 2009 9:11 pm
Re: Got my hands on a DT220-S, Can't find anything! Help!
Any FCC id number on the unit will provide a way to research the unit further in hardware specs and capabilities.
Re: Got my hands on a DT220-S, Can't find anything! Help!
dear ionbladez,
please for 1 picture inside this great thin client
thank you in advance!
please for 1 picture inside this great thin client
thank you in advance!
Got my hands on a DT220 S Cant find anything Help
hello again abi I really..REALLY want to own a sony e454, but I cant find it anywhere. it has everything I want for my next mp3 player, could anyone please help me find anyplace that sales they lovelies?
a как вам фото удачного момента?
a как вам фото удачного момента?
Скайп: katya.moo