DT368 specs

Specifications for the DT368 / Atigo T and discussion on hardware
Post Reply
Posts: 569
Joined: Tue Mar 24, 2009 9:11 pm

DT368 specs

Post by quotaholic » Sat Feb 13, 2010 9:10 pm

The WebDT368 / Atigo T came with the same horizontal 40 pin IDE internal flash the the DT366 came with. The CPU was a Transmeta Conroe clocked at 1GHZ. These units came with a variety of options. Most were preloaded with Windows XPe, some ran XP Pro.

Here is a link to a cut sheet:

Last edited by quotaholic on Mon Feb 15, 2010 6:30 am, edited 1 time in total.

Posts: 36
Joined: Wed Jan 27, 2010 12:52 am
Location: U.S.A.

Re: DT368 specs

Post by howie368 » Fri Feb 19, 2010 8:02 am

Detailed hardware list:

CPU - Transmeta TM5800 1Ghz
    Supported instruction sets - IA MMX, CMPXCHG8B, Conditional move instruction
    CPUID features - Debugging extension, Fast system call, Longrun, Longrun Table interface, Page size extension, virtual mode extension
    L1 Cache - 96kb Sync
    L2 Cache - 512 Kb Sync

Motherboard - Transmeta micro ATX TM-Q302
    CAS latency - 1T
    RAS to CAS latency - 1T
    RAS precharge - 1T
    ALi M5229 PCI ide bus controller
    ALi M1533 PCI-ISA Bridge
    Texas Instruments PCI-1520 PCMCIA cardbus Controller
    ALi M7101 Power management Controller
    ALi M5237 PCI to USB open host Controller
    NEC PCI to USB open host controller

Memory - 256mb (total) effectively less due to CMS reserved memory, set in bios
    Read benchmark - 618mb/s pc133 equivalent
    Write benchmark - 237mb/s pc133 equivalent   
BIOS - Phoenix (10/29/04)

Video - Silicon Motion LynxEM+ SM712
    4Mb memory
    24bit max color depth
Audio - ALi M5451

Touchscreen - Penmount 9000 Serial

Wireless - Cisco Aircard 350

Post Reply