Howie368,
Thank you very much for posting how to enter BIOS. To date, I just randomly pressed everything from F1 to F12, esc. delete, etc. until something appeared before entering XP.
The first window that pops up offers a selection of boot options plus entering setup. I noticed one of those options is Network Boot. Would it be possible to fully boot from the network like a thin terminal using the Cisco card? AFAIK, no OS would need to be installed on the unit itself, which means the flash disk is not used and thus preserved.
Secondly, I don't have the hardware to try other boot options, and I have read mostly about the DT366, but can Atigo T/DT368 boot XP exclusively from USB pen drive or Compact Flash slot?
Thank you
Network boot possible?
Re: Network boot possible?
you can do network load of the os that i have tried using the SDI loader from windows but i donthing there is anything else like thin client
for you second question windows will not install from usb and or cf card as the primary source
i ahve tried it and tried it nothing works.
for you second question windows will not install from usb and or cf card as the primary source
i ahve tried it and tried it nothing works.
-
- Newbie
- Posts: 16
- Joined: Tue Jan 05, 2010 1:35 pm
Re: Network boot possible?
i believe that network boot is possible only from ethernet when the unit is docked, dont quote me on this however as i have never tried it.
as for booting from usb, we primarily re-image literally 100's of these a week using win98 boot files and ghost from usb, so i know it at least boots into win98 command line.
as for booting from usb, we primarily re-image literally 100's of these a week using win98 boot files and ghost from usb, so i know it at least boots into win98 command line.