WebDT312: possible to upgrade flash memory to SSD?
Posted: Thu Aug 04, 2011 12:41 pm
Hello everyone,
I received my WebDT312 today (courtesy of eBay). The auction mentioned a 32 GB SSD, but upon arrival I reliased that it had 2048 MB flash instead. Slight difference. After consulting the DT Research website I became aware of that it is either flash or SSD - not both simultaneously. Anyway, it was relatively cheap and I will find some (other) use for it (target applications include home automation and datalogging in the field using NI hardware).
So, to my question: does anyone have experience with exchaning (if possible) the flash memory with an SSD in the WebDT312 or related DT's? Which dimension, connector etc. should the SSD have (I am no IT hardware professional)?
Thanks in advance.
Michael Madsen
I received my WebDT312 today (courtesy of eBay). The auction mentioned a 32 GB SSD, but upon arrival I reliased that it had 2048 MB flash instead. Slight difference. After consulting the DT Research website I became aware of that it is either flash or SSD - not both simultaneously. Anyway, it was relatively cheap and I will find some (other) use for it (target applications include home automation and datalogging in the field using NI hardware).
So, to my question: does anyone have experience with exchaning (if possible) the flash memory with an SSD in the WebDT312 or related DT's? Which dimension, connector etc. should the SSD have (I am no IT hardware professional)?
Thanks in advance.
Michael Madsen