This is my first post here, but before that I've read a lot, but not all
![Wink ;)](./images/smilies/wink.gif)
My WebDT366 with WinCE 5.0 works fine for me with only one significant and on less important exception.
Significant one is that so far I failed with USB to Serial adapter installation.
What I've tried is FTDI chip (FT232AM) based device and Windows CE 4.2-5.2 for x86 (32bit) driver from vendor web site:
http://www.ftdichip.com/Drivers/VCP.htm
I have to check with newer model based on FT232BM chip which is stated in driver references (FT232AM is not) - hopefully it will work.
I'll let you know results.
I have question if someone succeeded with this kind of adapter installation (no matter which model and which chipset) and how he did this?
Second issue refers to WiFi adapter which - I suppose - Cisco 350 is.
It doesn't support WPA encryption what forces me to re-configure my WiFi access point.
Does anybody know how to upgrade if possible?
Thank you in advance for any feedback - also negative.
--
Regards,
Krzysztof