Portable Apps
Portable Apps
I'm interested in install Windows XP in my DT366, but I have a question, It's posible install apps in a USB? Can I run portable apps?
If I have portable apps I can put all the aplications on a USB flash drive and I have free memory in the tablet.
If I have portable apps I can put all the aplications on a USB flash drive and I have free memory in the tablet.
-
- Full Member
- Posts: 135
- Joined: Tue Nov 23, 2010 5:51 pm
- Location: Florida's Central Gulf Coast
Re: Portable Apps
Yes, portable apps are great for the DT366 either from a USB drive or from the internal compact flash card - if you have one. I run them all the time. You can run XP embedded in locked mode (read only) and run the portable apps with no problems since they do not try to write to the system drive.
It's a great choice.
If you need help getting XP on it, let me know.
Good luck with it. -Dave
It's a great choice.
If you need help getting XP on it, let me know.
Good luck with it. -Dave
Re: Portable Apps
How I can run the XP in locked mode? And what is the best XP embedded?
Dave7341 wrote:Yes, portable apps are great for the DT366 either from a USB drive or from the internal compact flash card - if you have one. I run them all the time. You can run XP embedded in locked mode (read only) and run the portable apps with no problems since they do not try to write to the system drive.
It's a great choice.
If you need help getting XP on it, let me know.
Good luck with it. -Dave
-
- Full Member
- Posts: 135
- Joined: Tue Nov 23, 2010 5:51 pm
- Location: Florida's Central Gulf Coast
Re: Portable Apps
I suggest you read up on XPe - here's some great info:
http://msdn.microsoft.com/en-US/library ... ed.5).aspx
http://www.microsoft.com/windowsembedde ... opers.aspx
The EWF filter enabled or disabled with allow you to lock the OS or unlock to make changes. EWF enabled=locked, EWF disabled = unlocked.
You can convert an XP Pro installatation to an embedded system for reduced writes on your flash drive. A flash drive does have a 'maximum' number of writes so reducing disk writes will extend the life of your flash drive.
Let me know which model you have and what you want to do then maybe I can give you more specific info.
-Dave
http://msdn.microsoft.com/en-US/library ... ed.5).aspx
http://www.microsoft.com/windowsembedde ... opers.aspx
The EWF filter enabled or disabled with allow you to lock the OS or unlock to make changes. EWF enabled=locked, EWF disabled = unlocked.
You can convert an XP Pro installatation to an embedded system for reduced writes on your flash drive. A flash drive does have a 'maximum' number of writes so reducing disk writes will extend the life of your flash drive.
Let me know which model you have and what you want to do then maybe I can give you more specific info.
-Dave
Re: Portable Apps
I have the DT366 with 512M flash drive, 256 of RAM and AMD Geode 533M.
I bought this Tablet because I'm a student of computing, and I'm inerested in security, forensic analise, virus, web security, snifering...
I'm thinking in install WinXP for all this thinks, I think that It's a good idea.
Now I'm looking how create a Win XPe, It's the same that nLite?
I bought this Tablet because I'm a student of computing, and I'm inerested in security, forensic analise, virus, web security, snifering...
I'm thinking in install WinXP for all this thinks, I think that It's a good idea.
Now I'm looking how create a Win XPe, It's the same that nLite?
-
- Full Member
- Posts: 135
- Joined: Tue Nov 23, 2010 5:51 pm
- Location: Florida's Central Gulf Coast
Re: Portable Apps
IT student....cool...this will be a great exercise for you. Document it well and your professor will give you credit.
How to create and deploy an XPe image....
http://msdn.microsoft.com/en-us/library ... ed.5).aspx
There are other links on the forum for drivers. You need the drivers for the GX not the LX. Some drivers are the same but if they specify, use the GX version.
You may also want to try Puppy Linux v4.31. You can get an image to load on the 512mb drive and that version will read the PCMCIA and CF slot. There is an image in the forum for you to try with the touch screen drivers pre-installed - but where's the challenge there.....
Good luck! You' like these little tablets.
How to create and deploy an XPe image....
http://msdn.microsoft.com/en-us/library ... ed.5).aspx
There are other links on the forum for drivers. You need the drivers for the GX not the LX. Some drivers are the same but if they specify, use the GX version.
You may also want to try Puppy Linux v4.31. You can get an image to load on the 512mb drive and that version will read the PCMCIA and CF slot. There is an image in the forum for you to try with the touch screen drivers pre-installed - but where's the challenge there.....
Good luck! You' like these little tablets.
Re: Portable Apps
OK, thanks, this week I work with this project, when I finish the image I upload here, If I need anything I tell you.
The Puppy Linux is good, but you really, where is the challenge?
One thing, I don't know how begin, what is the first thing that I need?
The Puppy Linux is good, but you really, where is the challenge?
One thing, I don't know how begin, what is the first thing that I need?
-
- Full Member
- Posts: 135
- Joined: Tue Nov 23, 2010 5:51 pm
- Location: Florida's Central Gulf Coast
Re: Portable Apps
Begin at Microsoft's MSDN for the best advice on creating and deploying an XPe image.
Go here:
http://msdn.microsoft.com/en-us/library ... .5%29.aspx
This is where to begin.
Good luck. -Dave
Go here:
http://msdn.microsoft.com/en-us/library ... .5%29.aspx
This is where to begin.
Good luck. -Dave
Re: Portable Apps
this text is of the WebPageFirst, set up your bare metal computer with all of the peripherals you intend the final device to have. Next, insert Windows XP Embedded installation disc 1 into the CD-ROM drive of the target computer and boot to WinPE. When the computer is in the WinPE environment, navigate to the \XPE directory and run TAP.exe with the following parameters to save the devices.PMQ file to a floppy drive:
But how I download WinPE environment? And For create one Win XPe I need to boot on the tablet?
-
- Full Member
- Posts: 135
- Joined: Tue Nov 23, 2010 5:51 pm
- Location: Florida's Central Gulf Coast
Re: Portable Apps
This thread was about portable apps - there are other threads on the forum about XPe.
I typed your question into google.com and this answer was near the top:
http://www.microsoft.com/download/en/de ... n&id=17433
This is where you will find the download and basic instructions. For specific information, read the info on MSDN where the first link goes.
If you do not know how to make an XPe image, don't try to put XPe on your tablet. Use XP Pro or one of the trimmed down versions like Micro XP or XP Lite. If you have never worked with XP then use Puppy Linux.
Read the other threads in this forum for info on how to load an operation system on your tablet.
By the way, I love portable apps!
I typed your question into google.com and this answer was near the top:
http://www.microsoft.com/download/en/de ... n&id=17433
This is where you will find the download and basic instructions. For specific information, read the info on MSDN where the first link goes.
If you do not know how to make an XPe image, don't try to put XPe on your tablet. Use XP Pro or one of the trimmed down versions like Micro XP or XP Lite. If you have never worked with XP then use Puppy Linux.
Read the other threads in this forum for info on how to load an operation system on your tablet.
By the way, I love portable apps!
Re: Portable Apps
OK, very thanks. I use portable apps, it's a good option.