Page 1 of 1
BIOS DT368
Posted: Tue Aug 11, 2009 12:24 pm
by borlud
I have got the unit DT368 (Hard Disk 0:512Mb-Flash Memory; Hard Disk 1,2,3: None; 256Mb-RAM. BIOS (DTResearch DT368 BIOS ver.2.00.28) can be accessed through the key F2 and his settings are not changeable. It would be very kind of you, if you could tell me how I can set up BIOS for boot this unit from CD-ROM or USB �hard drive.
Thank you.
borlud
Re: BIOS DT368
Posted: Tue Aug 11, 2009 1:11 pm
by rectic
I've got BIOS 2.00.28 on mine, it's PhoenixBIOS and I've got the ability to change things..
Re: BIOS DT368
Posted: Wed Aug 12, 2009 1:18 am
by borlud
Hi, rectic
Please, explain how J can set up BIOS for boot this unit from USB-Stick
Thank you
borlud
Re: BIOS DT368
Posted: Wed Aug 12, 2009 6:05 am
by rectic
I get into BIOS with CTRL F2.
There are tabs at the top and one says Boot. You can then use + or - to change the boot order.
That is at least how PhoenixBIOS works on this one. There may be other BIOS's out there for these units.
Re: BIOS DT368
Posted: Wed Aug 12, 2009 8:01 am
by borlud
Thanks. It has turned out. What from the opened lines concerns to USB-stick